TitleProduct

Z15 Type Keyless Locking Device Manufacturer

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Hebei

  • Validity to:

    Long-term effective

  • Last update:

    2017-12-06 15:48

  • Browse the number:

    235

Send an inquiries

Company Profile

Cangzhou Tanso Coupling Co., Ltd.

By certification [File Integrity]

Contact:Ms. Tiffany Tang(Mr.)  

Email:

Telephone:

Phone:

Area:Hebei

Address:Hebei

Website: http://cztslzq.mhjpj.com/

PRODUCT DETAILS

Tanso Shaft Locking Devices connect hubs solidly to shafts, using a keyless mechanical interference fit, to transmit torque or to withstand axial thrust. This mechanical interference fit utilizes screw tension in the Shaft Locking Device, converted into radial pressure via an inclined plane. This pressure expands the Shaft Locking Device to eliminate the gap between the hub and the shaft. The Shaft Locking Device uses the friction bond between the Shaft Locking Device and the shaft/hub to create a zero backlash connection. This connection is easily releasable to remove the mechanical interference fit.

Tanso Shaft Locking Devices expand to fill the gap between the shaft and hub, allowing for easy installation and removal, saving time over traditional interference fit techniques. The contact pressures created using a Shaft Locking Device can be greater than traditional interference fit pressures, allowing for more torque to be transmitted or shorter hubs to be used. The easy installation also allows the hub to be positioned more accurately on the shaft, and can facilitate angular timing of the hub.

Easy assembly and disassembly

Both actions take place by locking and unlocking the clamping screws with common tools.

The use of a torque wrench is only necessary when a more precise torque is required.

Superior holding power

The action of the clamping cones creates shaft clamping torque superior to a normal keyed hub.

Overload protection

When the pre-set torque is exceeded locking device will slip, preventing the connected elements from being broken.

Note: Locking units are not friction couplings, so excessive slip will cause damage.

Easy adjustment

Combining the locking device design of smooth cone action with superior holding power, the hub can be clamped at any position along a shaft, eliminating the need for lock washers, spacers , stop rings, etc.



Dimensions(mm) Rated load Hexagon bolt Pressure 
between
 lock and 
the shaft
Pressure 
between 
lock 
and hub
Mass
pt pt kg
d D L1 L2 L3 L4 Torque Axial
force
d1 n MA N/mm2 N/mm2  
Mt Ft N.m      
kN kN.m        
20 47 20 17 23 29 0.34 34 M6 5 17 242 121 0.25
22 47 20 17 23 29 0.38 34 M6 5 17 220 121 0.24
24 50 20 17 23 29 0.41 34 M6 5 17 202 114 0.27
25 50 20 17 23 29 0.43 34 M6 5 17 194 114 0.29
28 55 20 17 23 29 0.6 42 M6 6 17 207 124 0.31
30 55 20 17 23 29 0.64 42 M6 6 17 194 124 0.3
35 60 20 17 23 29 0.9 51 M6 7 17 194 133 0.33
40 65 20 17 23 29 1.03 51 M6 8 17 194 140 0.37
45 75 24 20 28 36 1.8 80 M8 6 41 200 144 0.62
50 80 24 20 28 36 2.3 80 M8 7 41 210 156 0.67
55 85 24 20 28 36 2.9 107 M8 8 41 218 169 0.72
60 90 24 20 28 36 3.2 107 M8 8 41 200 160 0.77
65 95 24 20 28 36 3.8 120 M8 9 41 208 171 0.82
70 110 29 24 34 44 6 170 M10 8 83 225 173 1.5
75 115 29 24 34 44 6.4 170 M10 8 83 210 166 1.59
80 120 29 24 34 44 6.8 170 M10 8 83 197 159 1.67
85 125 29 24 34 44 8.1 190 M10 9 83 209 171 1.76
90 130 29 24 34 44 9.6 210 M10 10 83 219 183 1.84
95 135 29 24 34 44 10.1 210 M10 10 83 207 176 1.9
100 145 33 28 38 50 11 220 M12 8 145 190 154 2.58
110 155 33 28 38 50 14 250 M12 9 145 194 162 2.79
120 165 33 28 38 50 17 280 M12 10 145 198 170 3
130 180 38 33 43 55 23 350 M12 12 145 190 158 4.1
140 190 38 33 43 55 24 345 M12 12 145 177 150 4.37
150 200 38 33 43 55 30 400 M12 14 145 192 166 4.63
160 210 38 33 43 55 35 440 M12 15 145 193 170 4.9
170 225 43 38 49 63 41 480 M14 12 230 176 151 6.56
180 235 43 38 49 63 51 560 M14 14 230 194 168 6.9
190 250 51 46 57 71 61 640 M14 16 230 177 150 9.27
200 260 51 46 57 71 72 700 M14 18 230 190 162 9.7
220 285 55 50 61 77 99 900 M16 16 355 198 168 12.3
240 305 55 50 61 77 108 900 M16 16 355 181 157 13.3
260 325 55 50 61 77 130 1000 M16 18 355 188 165 14.3
280 355 65 60 73 91 170 1200 M18 18 485 178 152 21.4
300 375 65 60 73 91 200 1350 M18 20 485 184 160 22.7
320 405 77 72 85 105 275 1700 M20 20 690 189 160 32.2
340 425 77 72 85 105 290 1700 M20 20 690 178 152 34
360 455 89 84 99 121 385 2000 M22 20 930 181 152 47.2
380 475 89 84 99 121 430 2200 M22 21 930 180 153 49.5
400 495 89 84 99 121 450 2200 M22 21 930 171 147 51.8
420 515 89 84 99 121 545 2500 M22 24 930 186 161 54.2
440 545 101 96 113 137 660 3000 M24 24 1200 181 154 72
460 565 101 96 113 137 690 3000 M24 24 1200 173 148 74.9
480 585 101 96 113 137 720 3000 M24 24 1200 166 143 77
500 605 101 96 113 137 880 3400 M24 28 1200 186 162 80.8
520 630 101 96 113 137 915 3400 M24 28 1200 179 155 88.1
540 650 101 96 113 137 950 3400 M24 28 1200 172 150 91.1
560 670 101 96 113 137 1060 3700 M24 30 1200 178 156 94.2
580 690 101 96 113 137 1100 3700 M24 30 1200 172 152 97.3
600 710 101 96 113 137 1130 3700 M24 30 1200 166 148 100.3